Professional Round Rock Concrete Company

Concrete Contractor in Taylor, TX - Driveways and Slabs Built on a Solid Base

New concrete driveway in broad gray panels leads to a white house with black metal roofs, framed by trees and hedges.
  • Licensed and fully insured.
  • Free in-person estimates.
  • We reply within 1 business day.

What Taylor driveways, patios and slabs need from us

We're a concrete contractor based in Round Rock, and we drive out past Hutto for jobs in Taylor. Most calls here are driveways, patios and back slabs, on older houses in the blocks around Historic Downtown and on newer homes toward the edge of town. We also get business owners who need a parking lot or a foundation installation. The price moves with the size of the job, whether an old slab has to come out first, how much base work the ground needs and the finish you pick. The schedule mostly turns on whether a permit is needed, so before we set a date, we check which city or county office covers your address. I come out to look at the job myself, and you get your own numbers from that estimate.

On older lots here, the slab we break out often sat on dirt that was just raked flat. That's why the base comes first on our jobs, before anyone talks about color or stamps.

Common concrete problems we see in Taylor

  • Sinking, uneven slabs

    A slab that drops at one edge usually sat on dirt that was raked level, not dug out and packed. We fix the subgrade, the ground under the slab, before any concrete shows up.

  • Water pooling by the house

    When a patio or driveway falls toward the house, rain sits against the foundation and works under the slab. We check where the water runs before we set a single form, so it drains away.

  • Cracks in the wrong places

    Concrete shrinks as it dries, so we cut control joints, shallow grooves that tell it where to crack. When joints are cut late or skipped, cracks run wherever they like across your slab.

  • Flaking, dusty tops

    A powdery top that chips away usually comes from a rushed finish or a slab that dried out too fast. We plan the pour and protect it through curing, the wait while it hardens.

Should you patch or replace a cracked slab in Taylor?

If the crack is thin and both sides still sit level, patching it or cutting out one section is usually enough, and the rest of the slab has plenty of life left. If the slab has sunk, tilts toward the house or has broken into pieces, the problem is underneath it, and nothing done on top will hold for long.

That's when I'll tell you to replace it, even if it's not what you hoped to hear. The trade-off I name on every job is base against finish. The base is buried on day one, so it's the first thing people want to cut, but a nice stamped top on a weak base usually cracks anyway. I'd put the money into the base first, then pick the finish.

Concrete questions from Taylor homeowners

  • Do I need a permit to level my foundation in Taylor, TX?

    Yes, the city requires a permit for foundation leveling or releveling, including work that adds or replaces piers, and for foundation repair. A leveling permit doesn't need a stamped engineer's drawing, which keeps it simpler. When we take on the job, we handle the application and keep it moving.

  • Do I need a permit to pour a concrete driveway or patio in Taylor?

    The city's permit rules are written around buildings and structures, so they don't settle a driveway or patio on their own, and the city is the one to ask. The Development Services Department issues building permits, and you can email permits@taylortx.gov before work starts. Ask first, because the city says going ahead without a required permit can bring fines.

  • Can I pull my own concrete permit in Taylor as a homeowner?

    Yes, the city lets homeowners get permits for work at their own home without registering as a contractor, except for HVACR work. You'll show the building official proof that you own the house and live in it as your homestead. If you hire us instead, the city needs the contractor registered with it before the permit is issued, and we take care of the application.

  • How do I apply for a building permit and request inspections in Taylor?

    You apply, track the permit and request inspections online through My Government Online, the system the city uses for permits. Every message about the permit goes through that site, so keep an eye on it while the job runs. The city's building permits page walks through it, and when we're running the job, we handle that side for you.

  • How much does a new concrete driveway cost in Taylor, TX?

    A Taylor driveway's price comes down to its size and thickness, whether an old slab has to come out, how much base work the ground needs and the finish. A broom finish, the light rough texture that keeps tires and shoes from slipping, costs less than stamped or decorative work. I come out, measure it and give you your figure on site.

  • What causes a concrete driveway to crack, and will a new one crack too?

    Most bad cracking comes from a base that settles, water getting under the slab, or joints cut late or not at all. Concrete can still get thin shrinkage cracks, so nobody can honestly promise a crack-free slab, but a packed base, good drainage and joints cut on time keep cracks small and where we planned them. Rebar, the steel set inside the slab, helps keep the pieces from pulling apart if a crack does open.

Other cities we work in, or call us

Pick your city below to see the work we do there. If yours isn't listed, call (512) 276-6396, since we work in many of the cities around Round Rock.

Tell us about your Taylor concrete job

Tell us the job and your Taylor address. We reply within one business day, then I come out myself for a free, no-obligation estimate on site.

(512) 276-6396